Professional Supplier Liquid CO2 Filling Pump Best Selling
Industrial gas pumps are mainly used for air separation products: filling of liquid oxygen, liquid nitrogen, liquid argon, liquid carbon dioxide, air supply systems, the units are mainly single row, double row and three-row reciprocating pumps. Refer to each parameter table for specific...
Party A: Product Description (Industrial Gas Pumps)
Industrial gas pumps are mainly used for air separation products: filling of liquid oxygen, liquid nitrogen, liquid argon, liquid carbon dioxide, air supply systems, the units are mainly single row, double row and three-row reciprocating pumps. Refer to each parameter table for specific parameters.
Its flow is 300~5000L/H and its maximum exit pressure is 35.0mpa.An electromagnetic adjustable speed motor or a fixed rotating speed motor or a variable frequency and variable speed motor or an explosion proof motor or an explosion proof variable frequency motor can be equipped as per actual requirements.
Instructions for installing units:
a.The pump inlet shall be close to the storage tank to the greatest extent.
b.From the pump to the storage tank, the liquid inlet and air return pipeline shall be kept upward sloping to make the air inside the pipeline return to the storage tank, Reverse “U-shaped” elbows are prohibited in the liquid inlet pipeline, and “U-shaped” elbows are prohibited in the air return pipeline.
c.Ball valves or brake valves shall be used for the liquid inlet pipeline and the air return pipeline. Stop valves shall not be used. Elbows shall be reduced to reduce pipeline resistance.
d.Thermal insulation shall be performed for the liquid inlet pipelines and facilitate operation, a liquid outlet/air outlet pressure interlocking device with automatic control can be equipped.
e.After the reciprocating pump is operated for 600hours,the motor direction can be changed to make the transmission case rotate in a reversed direction so as to enhance the service life of the transmission case.
Party B: Product parameters (Carbon Dioxide Pump Series)
1.Scope of application
a.Such pumps are mainly used for liquid carbon dioxide.
b.Filling of carbon dioxide liquid cylinders.
c.Air supply, air distribution systems.
2.Main technical parameters
b.Maximum exit pressure:10.0mpa
A.JB/T 9076 Specifications for reciprocating cryogenic liquid pumps
B.GB/T 9234 Power Reciprocating Pumps
a.Stationary motor/electromagnetic speed regulation/frequency control
b.Safety valve/cryogenic stop valve
c.Back temperature interlocking device
d.Air outer temperature interlocking device
e.Liquid outer pressure interlocking device
a.The precooling is fast, which makes it not easy to form dry ice inside the pump.
b.The simple pump head module design facilitates maintenance.
c.The pump has the design of new type gland packing and ultra-long service life.
d.Maintenance is convenient, it merely takes two hours to perform a routine maintenance.
e.The pump can be continuously operated for 24 hours.
Flow range L/H
Inlet pressure Mpa
Max pressure Mpa
Party C: Our company
Xinxiang Chengde Global Trading Co.,Ltd. is a subsidiary company of Xinxiang Chengde Energy Technology Equipment Co., Ltd.
Xinxiang Chengde Energy Technology Equipment Co., Ltd. (Chengde Gas Equipment Co., Ltd.) was Founded in 2002, Consists of: Xinxiang Chengde Global Trade Co., Ltd. and Xinxiang Jin Cheng Technology Co., Ltd; company is located in Industrial Park, Fengquan district, Xinxiang city, Henan province.
The company has been committed to the pressure vessels, Low-temperature cryogenic equipment and gas
equipment in the field of research and development, design, manufacture and installation. Has Administration
of Quality Supervision, Inspection and Quarantine issued a "pressure vessel manufacturing license," "pressure
vessel design permits", "pressure pipeline design permits", "pressure pipe installation maintenance permit";
Has won the national low temperature testing center certification of product models, brand-name products in
Our company's main products are: cryogenic liquid storage tank, large flat cryogenic liquid storage tank,
cryogenic liquid pump, air bath type vaporizer, water bath vaporizer, gas pressure regulating device and
non-standard pressure vessel etc. Involved in the liquid oxygen, liquid nitrogen, liquid argon, liquid carbon
dioxide and other industrial gases equipment engineering; LNG refueling station, LNG vaporizing station
complete sets of equipment engineering; recovery of carbon dioxide liquefaction projects in areas such as
equipment manufacturing and installation.
Party D: Our products pictures
As you know,We have more than 14 years of production experience,also have rich exported experience.
We supply Industrial gas(O2,N2,Ar,CO2,LNG etc) filling stations for foreign market more than10 years.
Complete gas solutions,can be provided for customers.
Of course,total package for the filling station can be done by us.
Including installation,comssioning and start-up etc.
We have agent in Vietnam, South Korea, Kenya, Indonesia, Pakistan,Australia, the United States, kazakhstan,
also have agent in Iran.
Cooperate with us,you need not worry about quality and after-sale Service.
You can check our products in our agent factory,we can also arrange engineer help you solve all products
Party E: Foreign customers visit our factory
Many foreign customers visited our factory,some customers stay in our city do filling station test,And they get good answer.
We are big factory,Our biggest advantage:
1.Quality:We guarantee the quality of our products,if you bought our products,whenever you have any question
about our products,ps tell us,we will never caused products trouble for any customers.
2. Delivery time:In our factory,There more than 180 pcs tanks in stock.If customers need Conventional models products,Usually we can ship products to customers within 15 days.if your needed products we have not in stock,
usually we can ship to you within 60 days.
3.After-sales service:whenever our customers have question,after we received your question,we will give you feedback within 24 hours.we can provide installation,comssioning and start-up etc service for customers if you need.
4.Price:We are manufacturer,cooperate with us can help you save much money.Some customers do not know manufacturer,they buy products from trading company.will need more money,For new customers,We have a
Party F: Our products certification
In order to open more international market, we have got all domestic pressure vessel certification, We
will get our ASME certification soon.
Party G: Our related products
We can also production these products,if you need,ps contact us dear.
Once we know your project,we can give you more better more professional suggestion.
Our factory have more than 14 years of production experience,but our engineer have more than 38 years
Equipped with one of the leading CNCD professional supplier liquid co2 filling pump best selling brands, it is one of the best manufacturers and suppliers of high-quality CE certification professional supplier liquid co2 filling pump best selling. Please feel free to wholesale products from our factory and company.